The 2020 Mid-Year Economic Update_long

Capacity Utilization for Canadian Industries Improves in 1Q

Manufacturing industry primary driver of increases.

Canadian industries operated at 74.2 percent of their production capacity in the first quarter of 2010, up from 71.3 percent in the fourth quarter of 2009. This was the third consecutive quarterly increase. Prior to these gains, capacity use had been on a downward trend since the first quarter of 2007, when the rate was 83.1 percent, 8.9 percentage points higher than the rate in the first quarter of 2010.

Increases of 2.7 percentage points in the fourth quarter of 2009 and 2.9 percentage points in the first quarter of 2010 were the largest quarterly gains on record.

We Deliver Distribution News to Your Inbox
Sign up below to receive MDM Update, your free weekly distribution news update by email.

\"\"

The strength recorded by the overall Canadian industries was mainly driven by the manufacturing industry, where the utilization rate rose from 70.7 percent to 75.0 percent. Most non-manufacturing sectors posted gains in capacity use for a second consecutive quarter. In the first quarter of 2010, mining led the growth with an advance of 8.2 percentage points.

Manufacturing
Growth of capacity use in manufacturing was widespread, with 20 of the 21 major manufacturing industries advancing. Capacity use in total manufacturing increased by 4.3 percentage points in the first quarter of 2010 to 75.0 percent, following gains of 3.0 and 2.2 percentage points in the fourth and third quarters of 2009, respectively.

Overall, four industries were major contributors to the higher rate for total manufacturing: transportation equipment, primary metal, chemical, and machinery manufacturing.

The transportation equipment industry operated at 63.6 percent capacity in the first quarter of 2010, compared with 60.0 percent in the previous quarter. This was 16.3 percentage points higher than the first quarter of 2009, when the industry’s capacity use hit the lowest level on record. Manufacturers of motor vehicles and motor vehicle parts continued to increase production in response to sustained demand for automotive products in both Canada and the United States.

In the primary metal manufacturing industry, the utilization rate rose 9.5 percentage points in the first quarter of 2010 to 86.4 percent, following another 9.5 percentage point increase in the fourth quarter of 2009. Production of primary metals was up 8.8 percent, the result of increased iron and steel mills and ferro-alloy production, and alumina and aluminum production and processing.

Capacity use in the chemical manufacturing industry grew from 76.7 percent to 82.1 percent, continuing an upward trend that started in the third quarter of 2009. Higher production by pharmaceutical and medicine manufacturers and by petrochemical manufacturers led to a 4.2 percent production gain in the industry.

Machinery manufacturers used 71.6 percent of their production capacity, up from 64.8 percent in the previous quarter. The main contributing factor was a large increase in the production by metalworking machinery manufacturers, and by construction, mining and oil and gas machinery manufacturers.

Printing and related support activities was the only industry among the 21 major manufacturing industries to post a lower first quarter rate. Capacity use in the industry edged down from 63.9 percent to 63.7 percent, reflecting a 0.4 percent reduction in output. This industry had among the lowest utilization rates in manufacturing. Clothing had the lowest rate at 57.2 percent, 13.0 percentage points lower than in the first quarter of 2009.

Non-manufacturing
In the non-manufacturing group, capacity use advanced in the mining, construction and forestry and logging sectors. The oil and gas extraction sector used less of its production capacity while the utilization rate of the electric power generation, transmission and distribution sector remained unchanged.

In mining, capacity use rose from 58.0 percent to 66.2 percent in the first quarter, following an increase of 7.5 percentage points in the previous quarter. This increase reflects a 14.3 percent advance in production, largely attributable to substantial output gains in support activities and potash mining.

Capacity use in the construction sector increased from 70.2 percent to 71.8 percent, as production in residential construction rose 8.2 percent.

The oil and gas extraction sector reduced its capacity use by 0.8 percentage points to 76.2 percent in the first quarter. This reduction was driven mainly by lower crude petroleum extraction activity, which offset higher activity in natural gas facilities.

In the electric power generation, transmission and distribution sector, the utilization rate remained unchanged at 78.4 percent from the fourth quarter of 2009. Demand for electricity was flat in the first quarter of 2010.

About the Author
Leave a Reply

Leave a Comment

Sign Up for the MDM Update Newsletter

The MDM update newsletter is your best source for news and trends in the wholesale distribution industry.

By subscribing, you are agreeing to MDM’s Privacy Policy.
Social Media Auto Publish Powered By : XYZScripts.com